Steel Insert High Density EPS Solid Core Polystyrene
2400 Uni Steel x 2
Steel Insert High Density EPS Solid Core Polystyrene
PLEASE NOTE: Stock Uni (Universal) Doors are manufactured with 4mm skins (38mm thick door) only and are available in standard widths 410mm to 910mm, in heights of 2200mm and 2400mm.
All other skin thicknesses or custom width doors are made to order and are not manufactured to be cut down. If you require a Uni door with any other skin thickness, you must specify this when placing your order.
Our 3mm 2200mm stock doors are not Uni doors and, therefore, are not designed to be cut down.
Rails & Stiles
Rails : 168mm Finger Jointed Pine
Stiles : 40mm Finger Jointed Pine
Lockblock
640x68mm Finger Jointed Pine
EPS Core
High Density Solid Core Polystyrene
Up to 98% Glue Contact area
Will not delaminate after impact
Enhanced thermal qualities
Rails & Stiles
Rails : 168mm Finger Jointed Pine
Stiles : 40mm Finger Jointed Pine
Lockblock
640x68mm Finger Jointed Pine
EPS Core
High Density Solid Core Polystyrene
Up to 98% Glue Contact area
Will not delaminate after impact
Enhanced thermal qualities
Steel Insert
Custom designed and precision engineered
Anti corrosive pre galvanised steel
38.1x29.9mm with 1.6mm wall thickness for added rigidity
Full Details
Base material from New Zealand Steel
Precision manufactured to 38.1x29.9mm, with 1.6mm wall thickness for added rigidity. Pre Galvanised for clean finish.
